611 industrial way west, eatontown, nj 07724 tel: 732-460- 0212 fax: 732-460-0214 sales@advanced-control.com www.a dvanced-control.com features: ? low insertion loss ? low leakage power circuit protection ? high cw power handling ? hermetically sealed modules ? assorted package styles ? custom designs available peak cw maximum maximum maximum frequency input input flat leakage flat leakage insertion standard optional range part power power (peak power) (cw power) loss maximum case case (ghz) number (watts) *(3) (watts) *(2,3) (+dbm) (+dbm) *(1) (db) vswr styles styles 0.1 - 1.1 aclm4538 100 2 20 18 0.4 1.4:1 c3 c36,c37,m22 0.5 - 2 aclm4530 100 2 20 18 0.4 1.4:1 c3 c36,c37,m22 0.1 - 4 aclm4637 100 2 20 17 0.5 1.4:1 c3 c36,c37,m22 1 - 4 aclm4581 100 2 20 17 0.5 1.4:1 c3 c36,c37,m22 2 - 4 aclm4531 100 2 20 17 0.5 1.4:1 c3 c36,c37,m22 0.5 - 6 aclm4700 100 2 20 17 0.7 1.5:1 c3 c36,c37,m22 2 - 8 aclm4540 100 2 20 17 0.7 1.5:1 c3 c36,c37,m22 0.5 - 8 aclm4606 100 2 20 17 0.8 1.5:1 c3 c36,c37,m22 1 - 8 aclm4597 100 2 20 17 0.8 1.5:1 c3 c36,c37,m22 4 - 8 aclm4532 100 2 20 17 0.8 1.5:1 c3 c36,c37,m22 2 - 12 aclm4535 100 2 21 18 1.5 1.6:1 c3 c36,c37,m22 8 - 12 aclm4533 100 2 21 18 1.5 1.6:1 c3 c36,c37,m22 0.5 - 18 aclm4601 100 1 21 18 1.8 1.9:1 c36 c37,m22 2 ? 18 aclm4537 100 1 21 18 1.8 1.9:1 c36 c37,m22 8 - 18 aclm4539 100 1 21 18 1.8 1.9:1 c36 c37,m22 18 - 26 aclm4765 100 1 23 21 2.5 2.0:1 c36 m22 notes: 1) cw leakage is measured at 1w input. 2) higher power handling available. contact the factory to discuss specific requirements. 3) power handling is linearly derated from full power at +25c to zero power at +150c. pin diode limiters are built to protect sens itive circuit elements such as receiver front ends or detectors. they reduce high power inputs to a low level that can be tolerated by the next component. limiters may be categorized as conventional or feedback types. the fami ly of conventional limiters typically exhibits leakage levels up to +20dbm wi th recovery times less than 40nsec. these models handle up to 100w peak power levels and cover the frequency range form 100mhz to 26ghz. custom models with higher power handling are available. pin diode limiters
611 industrial way west, eatontown, nj 07724 tel: 732-460- 0212 fax: 732-460-0214 sales@advanced-control.com www.a dvanced-control.com environmental specifications: screening : mil-e-5400, mil-std-202, mil-e-16400 standard screening : operating temp: -65c to +125c internal visual per mil-std-883, method 2017 storage temp: -65c to +150c temperature cycle: -65c to +100c, 10 cycles humidity: mil-std-202f, m103, cond b op tional high-rel screening (ref mil-prf-38534) : shock: mil-std-202f, m213, cond b internal visual per mil-std-883, method 2017 altitude: mil-std-202f, m105, cond b stabilization bake per mil-std-883, method 1008 vibration : mil-std-202f, m204, cond b temperature cycle per mil-std-883, method 1010 thermal shock: mil-std-202f, m107, cond a c onstant acceleration per mil-std-883, method 2001 temperature cycle: mil-std-202f, m105c, cond d burn-in per mil-std-883, method 1015 leak test per mil-std-883, method 1014 external visual per mil-std-883, method 2009 case style c3 case style c36 case style c37 case style m22 part number ordering information: example: aclm4533c3r1k aclm4533: conventional limiter, 8 ? 12ghz c3: package type r: reversed connectors (omit for standard configuration) 1k: 1kw peak power handling (omit for standard 100w peak power handling) lm-0205 ?0.1000.005 thru (2) plcs. sma female input 0.26 0.525 (ref) 1.2820.010 0.625 sma female output 0.250 0.48 0.07 sma female (output) sma male (input) ?0.312 1.320.020 0.48 0.250 0.625 1.417 0.530 (ref.) 0.07 sma male input sma female output ?0.100.005 thru (2) plcs. 0.26 0.250 0.120 0.246 .003 0.120 0.080 0.532 0.058 typ. input ?0.012 typ. 0.129 output l c
|
